纺织常识|QC评语集锦

   日期:2016-08-22     来源:建材之家    作者:饰品之家    浏览:17    评论:0    
核心提示:The out-come / appearance of the frills of sealing sample is not ccceptable, it looks very flat / dead, must be more balanced / natural look as standard sample DD 28.8.02.前中荷叶边太死太平,不够生动,请以2002年8月2

中频点焊机选购的方法—苏州安嘉

推荐简介:无论建筑行业还是在制造行业都会使用到,在我们生活和工作中运用的范围也更加广泛了,在现代社会发展中已经成为了或不可缺的工具。对于现在来说,中频点焊机在市场上占据了重要的位置,因而款式和类型都非常多,当然质量和价格也是千差万别的。那么作为消费者怎样才能选择质量好价格优的点焊机呢?不用担心,今天就让小编为您分享一下吧。1、选择点焊机,首先就需要到生产厂家进行选购,因为正规店铺产品质量才会更有保证,有一定......
饰品之家讯:The out-come / appearance of the frills of sealing sample is not ccceptable, it looks very flat / dead, must be more balanced / natural look as standard sample DD 28.8.02.

前中荷叶边太死太平,不够生动,请以2002年8月28日的办做标准。

Sort out the major material defects.

挑出严重布疵。

Take care for trimming + cleaning.

留意剪线和清洁。

Stringholes from plastic string ( for washing ) at pocket flap visible, must be removed.

袋盖上有洗水时打的枪针洞,请消除。

Front horizontal seam not leveLED.

前幅横骨不对称。

Handfeel slightly softer than approved sample.

手感比批办稍软。

Armhole pipping ( inside) 2mm more than sealing sample.

夹圈滚条宽度比原办大了2mm。

Pls. add one more button for bigger sizes.

请在大码的衣服上加多一颗钮扣。

Make sure inner facing is long enough in order to avoid pulling at placket bottom.

确保襟贴足够长以避免前襟起吊。

Pay attn. the workmanship of ironing, don’t press the seam too much and avoid the seam allowance see through by heavy pressing.

注意烫工,骨位不要烫太重,避免缝骨止口起痕。

Center front collar not overlap but also not spray.

领子前中不要重叠但也不要张开。

Bust dart seam allowance must be ironed upward.

胸折止口要烫向上面。

Uneven width of top-stitches at closure edge.

前襟边面线宽度不均匀。

Pls. add one more button for all sizes as the distance from hem is too big.

请在所有尺码的衣服上加多一颗钮扣,因为离衫脚的距离太大。

Pls. fix pocket with movable stitches as sealing sample.

请跟原办在口袋上车上(可拆去的)假缝线。

The collar band must not visible at back when wear.

衣服穿着时下级领不能外露。

Pls. make sure the collar are balanced on both sides.

请确保领子两边对称。

Found 3 colors shade within 10 pcs!!

十件衣服中有三种色差!!

3 different color lots in color beige compare to the approved swatch: 3/10 pcs darker, 4/10 pcs lighter, 3/10 as swatch.

Beige色和色办相比有3种不同色差,其中3件偏深,4件偏浅,3件同色办。

Pay attention on the color, which within one garment must be in same color shade.

注意颜色,一件衣服里不能有色差。

Due to the price reason, we accept this order with cutting both ways either in direction or against hair – but you have to make sure the fabric direction must be always same with one garment.

因为价钱问题,我们接受这个订单的可以顺毛裁和逆毛裁,但一定要确保一件衣服内的所有裁片是同一毛向。(灯心绒衣服)

Pls. cut all jackets against hair.

所有夹克要逆毛裁。

Pls. close the pocket with several movable stitches ( must be not closed all, pls. leave 1cm at each side unstitching).

请用在口袋上缝一段可拆除的假线(一定不能全部缝合,两边要各留1cm不缝合)

饰品之家专注于各种家居的饰品,家纺,小饰品,装饰品,礼品,春节礼品,精美礼品的新闻资讯和导购服务,敬请登陆饰品之家:http://jiafang.jc68.com/
 
打赏
 
更多>文章标签:礼品 ;相关产品:
更多>同类家居饰品资讯
0相关评论

推荐图文更多...
广告位
点击排行更多...
广告位
广告位
内事更多...
广告位
最新视频更多...
推荐产品更多...
老姚之家 | 全景头条 | 照明之家 | 防水之家 | 防盗之家 | 区快洞察 | 潜江建材 | 仙桃建材 | 恩施建材 | 随州建材 | 咸宁建材 | 黄冈建材 | 荆州建材 | 孝感建材 | 荆门建材 | 鄂州建材 | 襄樊建材 | 宜昌建材 | 十堰建材 | 黄石建材 | 长沙建材 | 湘西建材 | 娄底建材 | 怀化建材 | 永州建材 | 郴州建材 |
建材 | 720全景 | 企业之家 | 移动社区 | 关于我们  |  联系方式  |  使用协议  |  版权隐私  |  网站地图 | 排名推广 | 广告服务 | 积分换礼 | RSS订阅 | sitemap | 粤ICP备14017808号
(c)2015-2017 Bybc.cn SYSTEM All Rights Reserved
Powered by 家饰之窗